VS 2000 Dörrtillslutare med 35 N Fjäder för Speciella Applikationer

Front door with a VS 2000 door check, fitted directly at the closing edge – up to now a problem due to the required opening force
Front door with a VS 2000 door check, fitted directly at the closing edge – up to now a problem due to the required opening force

Problem

In those cases where the VS 2000 has to be fitted directly at the closing edge
because e.g. the door has a glasspane or because above the door is no space for the hook,

often the model with a 20 N spring is not strong enough to completely close the door

with sealings. However, if you use the 50 N spring, opening the door requires too much force.

For this reason we now offer a special model of the VS 2000 with a 35 N spring.

Example Prison Landsberg

Data of the door:
– Width 1200 mm
– Weight more than 100 kg
– Mounting position of the VS 2000: distance to
the closing edge approx. 400 mm.VS 2000 på dörr

The door is closed by an overhead door closer. Up to now a VS 2000 with 50 N had been installed.
The customer wanted to dismount the door check and dispose of it, because it required too much
effort to open the door. Fortunately he called Markus Reiner to tell him that.
Now he replaced the 50 N cylinder with a 35 N one and the customer is very happy:
It is just the right thing, the door opens smoothly and everybody is satisfied. Unfortunately –
however for comprehensible reasons –we didn’t get any photos of this application.

Available models

VS 2000, hook 1020, 35 N, chromium-plated: Part no. 300570
VS 2000, hook 1020, 35 N, satin chromed: Part no. 300570X
Cylinder type D-H, 35 N, zinc-plated, for horizontal mounting: Part no. 205346